PDU41001 SWITCHED PDU 15A 120V

Introduction

PDU41001 SWITCHED PDU 15A 120V
Deliver AC power to servers, VoIP phone systems, network closets, data centers, connected devices, and more with the PDU41001 8-Outlet Switched PDU from CyberPower. Built with a 1 RU form factor, this PDU may be configured with a 0, 1, or 2 RU design using included mounting brackets. It provides 100-120V / 15A (derated to 12A) to 8 NEMA 5-15R plugs from its 12′ NEMA 5-15P plug with unfiltered electrical passthrough. Monitor this PDU’s power status over your network using CyberPower’s management console, while network connectivity can be achieved using an integrated RJ45 port. There is also one USB Type-A port, one RJ45 serial port, and separate RJ45 input and output ports for an environmental sensor, which would allow for the ambient room temperature to be monitored. Using an integrated LCD panel, you’ll also be able to monitor its power status, including information about amperage, voltage, kW, IP address, and more.

Provides local and remote control for individual and multiple outlets. Local control lets you turn on/turn off outlets and disable unused outlets. Remote control lets you restart outlets and devices, turn on/turn off, schedule power on/off sequencing, and disable unused outlets.

Built into Switched PDUs, a CyberPower Management Console is a hardware interface. Users can remotely switch individual PDU outlets or circuits on and off, either immediately or on a schedule, in order to power cycle connected equipment. It monitors the incoming power and power draw from the PDU, sends notifications based on the power status, and logs events.

Features and Benefits:

• Switch-Free Design
• Switchable Outlets
• CyberPower Management Console
• Remote and Local Monitoring
• Automatic Event Notifications
• Upgradeable Firmware
• Digital Display
• Network-Grade Plugs and Outlets
• Long Input Power Cord
• Cord Retention Tray
• Configurable Mounting Brackets
• Durable Metal Housing

In the Box:

• CyberPower PDU41001 8-Outlet Switched PDU
• RJ45/DB9 Serial Port Connection Cable
• Cord Retention Tray
• 2 x Mounting Brackets (Short)
• 2 x Mounting Brackets (Long)
• 10 x Flat Head M4x8 Bracket Mounting Screws
• 6 x M3x6 Cord Retention Tray Mounting Screws
• 6 x M5x12 Screws
• 6 x Washers
• 10 x Cable Ties