Megadap ETZ21 Pro Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter

Introduction

Megadap ETZ21 Pro Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter

TheMegadap ETZ21 Pro Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter expands the capabilities of your camera by allowing you to easily mount Sony E-mount lenses on a Nikon Z-mount body. With electronic communication, autofocus and auto exposure are fully supported, and EXIF metadata is seamlessly transferred to the camera. The sturdy stainless steel mounting ring and custom button compatibility make this adapter a reliable and versatile choice for both Sony and third-party E-mount lenses. Plus, the Pro version boasts a revamped lens release button, firmware upgradability, and compatibility with Sigma and Tamron lenses.

Features:

• Sony E-Mount Lens to Nikon Z-Mount Body Adapter
• Supports electronic communication
• 2mm thin; Made of stainless steel
• Support AF-S, AF-C, AF-F, Eye-AF, pinpoint focusing and Face detection
• Smooth focusing performance during video shooting
• Support auto aperture
• Support the use of manual lenses
• Support AF/MF button on the lens body
• Firmware upgradable through Nikon Z camera (with adapter + lens installed)

Compatible With:

Cameras:

• NikonZF, ZFC, Z30, Z50, Nikon Z5, Nikon Z6, Nikon Z6 ii, Nikon Z7, Nikon Z7 ii, Z8, Z9 cameras (or any newer models)
• Nikon Z APS-C cameras

Lenses:

• Sony E-Mount third-party lenses: Sigma, Tamron, Zeiss, Voigtlander, Samyang
• Viltrox and Yougnuo lenses are currently NOT supported

Notice: Handling the Megadap ETZ21 Pro

1. No Hot Switch of lenses.
   Always switch OFF the camera before you remove the lens or the adapter
2. No touching on connecting pins/pads
   Do NOT touch the connecting pad/pins with your bare hands. Static electricity produced may damage the electronic components in the adapter
3. Leave the adapter on camera
   When you swap between different E-mount lenses, switch off the camera and leave the ETZ21 Pro on the camera. Then unmount and mount another E-mount lens.
4. Dont turn the lens+adapter frequently
   Do not turn the lens+adapter back and forth frequently when camera is on or off.

Manufacturer’s Sku:

ETZ21PRO

In The Box:

Megadap ETZ21 Pro Sony E-Mount Lens to Nikon Z-Mount Autofocus Adapter

Notes:

1. If users wish to use multiple E-mount lenses with ETZ21 Pro, when changing lenses, please turn off the camera and then remove ONLY the E-mount lenses originally being mounted on the camera. Removing both the lens and adapter may cause adapter malfunctions.
2. Warranty service will be provided for purchase at Megadap. Contact [email protected] to confirm dealers validity.
3. Battery drain may happen while the adapter is on camera. Remove the adapter from camera after use to avoid battery drain.