Nanuk 975 Wheeled Hard Case with Foam

Introduction

The Nanuk 975 Wheeled Hard Case with Cubed Foamstores and protects sensitive gear with lightweight but strong NK-7 resin construction. Two sets of polyurethane wheels with stainless steel ball bearings and a two-stage retractable handle allow you to tow your gear effortlessly through the terminal or down the street, while soft-grip team handles on the sides make the case easy to lift and position. The multilayered foam insert cushions sensitive equipment and comes with a prescored cubed layer than can be plucked to shape for a perfect fit. The case secures with the Powerclaw latching system, using compressive force to tightly clamp the case shut and an integrated slide lock to prevent the case from opening during transport or when dropped. Rated IP67 for water resistance, the case features stainless steel hardware and an automatic pressure relief valve to prevent “vacuum lock” from changes in altitude, temperature, and humidity.

Features:

• Polyurethane wheels with stainless steel bearings for smooth rolling and durability
• Retractable pull handle plus side team handles for lifting
• Pluckable cubed foam for custom-fit interior protection
• Automatic pressure valve guards against the vacuum caused by changes in altitude and geographic location that tends to seal watertight cases shut
• Lid accommodates feet of another case for easy stackability
• Lightweight but strong NK-7 resin construction

Dimensions:
Interior (LWD):30 x 21 x 18 in (762 x 533 x 457 mm)
Exterior (LWD):33.5 x 24.3 x 19.7 in (851 x 617 x 500 mm)
Lid Depth:3.5 in (89 mm)
Bottom Depth:14.5 in (368 mm)
Total Depth:5.18 in(13.2 cm)
Interior Volume: TBD
Padlock Hole Diameter:50.340″

Technical Specs:
Weight Empty: 32.2 lb (4.6 kg)
Buoyancy: TBD
Body Material:Lightweight NK-7 resin
Wheel Material: Polyurethane
Wheels: 4
Minimum Temperature:-20F (-29C )
Maximum Temperature:140F (60C)

Configurations:
No Foam
With Foam