Peak Design Leash Camera Strap (Coyote)

Introduction

This Leash Camera Strap in coyote, from Peak Design has anchor links so you can quickly and easily detach a connected camera, to move it to a tripod, or connect another camera to the strap. Each anchor link is rated to hold 200 pounds and creates a durable, snap-in or snap-out connection point to the strap eyelet on a wide variety of cameras. The strap is 0.8″ wide and has an adjustable 32.6 to 57.1″ length. Integrated adjustment loops allow you to quickly adjust the length while in use.

Constructed with twist-resistant nylon webbing, you can use it as a neck, shoulder, or cross-body strap whether you are right- or left-handed, draped from one shoulder to the opposing hip. When used along with an anchor link, the included anchor mount creates a connection point using the camera’s 1/4″-20 bottom accessory thread. By attaching the leash along the bottom accessory thread and using one strap eyelet instead of two, your camera can be made to consistently face forward while against your hip, reducing the time needed to raise it to your eye to capture the shot.

• Use as neck, shoulder, or cross-body strap whether you are right- or left-handed
• Constructed from twist-resistant, nylon webbing
• Quickly and easily detaches from camera
• Anchor links create durable, snap-in or snap-out connection points to camera strap eyelet
• Use as cross-body strap and keep camera facing forward
• Integrated loops allow quick length adjustments
• Hex key attaches or detaches anchor mount
• Microfiber pouch for storage and transport