Photographic Solutions Type 3 Sensor Swab Ultra for Full-Frame Sensors, 24mm, 12-Pack

Introduction

Type 3 Sensor Swab Ultra for Full-Frame Sensors, 24mm, 12-Pack

The Sensor Swab Ultrais perfect for cleaning CCD and CMOS sensors, as well as other delicate or difficult-to-reach optical and imaging surfaces. Despite the sharp appearance of its tips, they are specifically designed to avoid scratching the sensor. These swabs are made in a clean room and sealed for maximum purity. They are also extremely absorbent and won’t shed or leave fibers behind.

Available in four sizes, please refer to your camera’s manual for instructions on exposing the sensor. It is important to ensure that your camera’s battery is fully charged and any loose dust or dirt has been removed with a blower or brush before proceeding.

Features:

• For cleaning CCD AND CMOS sensors
• End points for cleaner corners
• Cleans oil, dust, and debris
• Individually wrapped 24mm wide swabs

Directions for cleaning the camera sensor:

After you review the manual AND have seen our video demo, you are ready to clean your sensor.

1. With one side of the swab, firmly drag it across the sensor.
2. Repeat in the opposite direction using the clean side of the swab.
3. Please discard swab after use. Repeat if necessary with a new swab. Release camera shutter and replace lens.
4. Do not remove the swab from plastic bag until you are ready to use it. Dirt on the swab can scratch the sensor, so always remember to leave in plastic bag and immediately discard swab after use.

In The Box:

Photographic Solutions Type 3 Sensor Swab Ultra for Full-Frame Sensors, 24mm, 12-Pack

Notes:

The use of zoom lenses or bellows will increase the amount of contaminants within the sensor area and more frequent cleaning may be needed. When used as directed Sensor Swab ULTRA digital imaging sensor cleaner is easy and safe to use and yields excellent results!