Silence Corner Atoll D + for DSLR Cameras Black

Introduction

This product includes
Ring Base X1 : Max Lens Diameter 75mm
Camera Plate X1 : Extended Plate
Detachable Extended Brackets X2
4mm hex wrench X1
3mm hex wrench X1
Link Screw X4
1/4″-20UNC Screw X2

Features
Change the camera angle in one second.
180 free rotation, smooth experience. In some condition, it can even rotate to 360
3 click points at 0, 90 and 180. It’s much intuitive to adjust camera angle.
Change lens directly without disassemble. (compares to a tripod collar) Extremely safe to change lenses in dark place.
Keep center of gravity, more balanced.

Compatibility
Please checkATOLL compatible list for your camera, To avoid buying the wrong model.

Nikon Z series cameras are compatible with Heightening Plate and ATOLL D/D+
Heightening Plate and ATOLL D/D+ is not compatible with Nikon Z9/battery grip/body cage/L bracket

If you need to install the Grip/body cage/L bracket, please choose ATOLL X
Because the flash of Nikon DSLR is very protruding, many lenses cannot be mounted, It is recommended to install ATOLL X instead of ATOLL D on Nikon DSLR.
Canon DSLR series cameras cannot be mounted with EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses after installing ATOLL D/D+
Canon DSLR recommends installing ATOLL X to install EF 11-24 f/4 & 16-35 f/2.8 III & 24-70 f/2.8II or larger lenses.

Installation guide
Please watch ATOLL installation guide for more installation details.

Since Nikon Z series cameras are not high enough, if you install ATOLL D/D+ on Z series, it may not be completely aligned with the center of the lens, (However, most Z series lenses can be installed)

There are two ways to align ATOLL to the lens center of Nikon Z series cameras
Add-ons a Heightening Plate
you can try to disassemble the ATOLL, as shown in this video (there is grease inside, please pay attention) https://youtu.be/mktHdhu2xss

When installing the ATOLL D/D+ on the Nikon Z8, it may not fully align with the center of the lens, but most Z-mount lenses can be used. You can add a Bridge Plate to align it perfectly.

When installing the ATOLL D+ on the Nikon Z8 with an Extended Brackets, the Nikon 28-400 lens cannot be mounted

ATOLL D+ is not compatible with version Z Tamron 35-150 F/2-2.8
-If you install the Z mount version of the Tamron 35-150mm f/2-2.8 when using the ATOLL D+, it will block the camera grip space and prevent the use of the new Extended Brackets.

-If you install the Z mount version of Tamron 35-150mm f/2-2.8, it is recommended to choose ATOLL X+

Installing Heightening Plate & ATOLL C/C+ on the Z series may cover the function keys.
If you usually use the function keys,we recommend Heightening Plate & ATOLL D/D+,which can make ATOLL farther away from the camera and increase finger space to access function key.